Street-lamp replacement
Move quickly between scattered lamp posts and change fittings from the basket.
Aerial Work Platform Trucks
Chengli 4x2 4.5 t Compact Aerial Work Truck, Euro 6
Two wheelbases, a 90 kW Euro 6 diesel and an articulated boom define this 4.5 t Chengli aerial truck, a compact lift for street-lamp replacement and electrical repairs on scattered urban sites.
- Boom Type
- Articulated (folding) boom
- Chassis
- Chengli 4x2, 4,495 kg GVW, Euro 6
- Engine Power
- 90 kW
From US $34,000
Review specifications and quotation.
THE VEHICLE
Overview
The CL5049 is a light aerial work truck for municipal engineering departments, power maintenance teams and telecom contractors whose jobs are spread across town. Its articulated boom lifts a steel work basket from the rear deck, and because the lift is built into the truck no separate lifting equipment is needed at the site.
Two D20TCIF diesel engines, the D20TCIF15 and D20TCIF64, are each rated at 90 kW and meet Euro 6. Wheelbase is 2,800 or 3,000 mm, overall length 5,998 mm and width 2,090 mm, with heights from 2,690 to 3,400 mm depending on version. Gross vehicle weight is 4,495 kg with a 4,365 kg curb weight and axle loads of 1,650 kg front and 2,845 kg rear. ABS brakes, six 15- or 16-inch light-truck tires and a top speed of 105 km/h complete the chassis.
Side and rear protection is made of Q235 steel to resist knocks in tight streets. Typical tasks include street-lamp replacement, electric power maintenance and communication equipment repair. The two-seat cab suits a small crew, and the working height and basket rating of the chosen boom are shown on its chart.
TECHNICAL DATA
Specifications
Vehicle
| Vehicle Model | CL5049 |
|---|---|
| Gross Vehicle Weight | 4,495 kg |
| Curb Weight | 4,365 kg |
| Rated Payload | 130 kg |
| Overall Length | 5,998 mm |
| Overall Width | 2,090 mm |
| Overall Height Range | 2,690–3,400 mm |
| Approach/Departure Angle | 24° / 12° |
| Cab Occupants | 2 persons |
| Emission Standard | Euro 6 |
| Side/Rear Protection | Q235 steel |
Chassis
| Drive Type | 4x2 |
|---|---|
| Axles | 2 |
| Wheelbase Options | 2,800 / 3,000 mm |
| Axle Load (Front/Rear) | 1,650 / 2,845 kg |
| Engine Options | D20TCIF15 90 kW; D20TCIF64 90 kW |
| Fuel Type | Diesel |
| Transmission | Manual |
| Brakes | ABS |
| Tire Options | 6.50R15LT 8PR / 10PR; 6.50R16LT 8PR / 10PR; 7.00R16LT 8PR; 195/75R16C |
| Tire Quantity | 6 |
Superstructure
| Boom Type | Articulated (folding) boom |
|---|---|
| Work Basket | Steel-railed personnel basket |
| Outriggers | Fitted |
Performance
| Maximum Speed | 105 km/h |
|---|
CONFIGURATION
Equipment
Standard equipment
- Truck-mounted aerial platform and rear work basket shown in source photographs
- ABS braking and two-person cab listed in detailed record
Optional equipment
- Two 90 kW D20TCIF diesel-engine options and two wheelbases listed
IN THE FIELD
Applications
Power maintenance
Carry out low-voltage repairs on poles and building supplies.
Communication repairs
Service overhead communication equipment in narrow streets.
BEFORE YOU ORDER
Common questions
2,800 mm and 3,000 mm.
The D20TCIF15 or D20TCIF64 diesel, both rated at 90 kW and meeting Euro 6.
No. It is the vehicle payload; the basket rating is shown on the boom chart for the chosen boom.
Working height depends on the boom fitted and is stated on the boom chart supplied with the quotation.
EXPLORE THE RANGE
Related vehicles
Isuzu 4x2 36 m Telescopic Aerial Platform, 9.5 t
- 36 m
- Telescopic, 4 sections
- 200 kg
This Isuzu-based 4x2 aerial truck has a 36 m working height, an 11 m maximum range and a 200 kg work basket. Its four-section telescopic boom uses front V-shaped and rear H-shaped outriggers.
Dongfeng Tianjin 4x2 36 m Telescopic Aerial Platform
- 36 m
- Telescopic, 7 sections
- 200 kg
Seven telescoping boom sections give this Dongfeng Tianjin truck an 18 m stated reach at a 36 m maximum height class. Its 6,300 mm front stabilizer span sets it apart from compact bucket trucks.
JMC 4x2 17.5 m Aerial Work Platform, 200 kg Basket
- 17.5 m
- Telescopic, 3 sections
- 200 kg
A three-section heptagonal boom reaches 17.5 m on this JMC 4x2 truck. Its compact 5,995 mm body and independently adjustable V/H outriggers distinguish it from larger access vehicles.
JMC 4x2 4.5 t 15–20 m Aerial Truck, Narrow 2 m Body
- 15–20 m (by configuration)
- Three-arm folding boom
- JMC 4x2, 2,000 mm wide
At just 2,000 mm wide on a 2,800 mm wheelbase, this JMC 4x2 aerial truck slips into lanes that wider trucks cannot, with a three-arm folding boom rated for 15–20 m working height.
KNOW YOUR NEXT TRUCK
Related guides
Aerial Work Platform Trucks: Working Height, Outreach, Basket Load
A buyer's guide to truck-mounted aerial platforms from 14 m to 65 m: what the height figures mean, how boom type and basket rating affect the job, and which chassis and outrigger span each size needs.
Utility Bucket Trucks for Street Lights, Power Lines and Facades
Street-light crews, line crews and facade contractors need different aerial trucks. We match our 14 m to 65 m platforms to each job by height, outreach, stabilizer footprint, crew cab and chassis, using real figures.
Cherry Picker vs Bucket Truck vs Boom Lift: Which One Do You Need?
Cherry picker, bucket truck and boom lift all put a person in a basket at height, but only two of them are the same machine. Here is how to tell them apart, what working heights are available on a truck and when a self-propelled lift is the better tool.
LET US BUILD YOUR NEXT TRUCK
Your job. Your specification.
Tell us your vehicle type, required capacity and destination country. Our team will help you discuss the right configuration.
[email protected] ↗+86 18871880125Selected vehicle: Chengli 4x2 4.5 t Compact Aerial Work Truck, Euro 6