Distribution line repair
Work on 35/66 kV class lines from the insulated FRP bucket.
Aerial Work Platform Trucks
Few aerial trucks can also tip a load: this 12 t 4x2 pairs an 18 m insulated FRP bucket rated at 280 kg with a tipping cargo bed, so line crews haul poles and spoil on the same truck.
From US $12,000
Review specifications and quotation.
THE VEHICLE
The CLW5110JGKD618M is an insulated aerial truck with a tipping cargo bed, built for power distribution crews who dig, replace poles and work on lines during the same job. A three-section telescopic boom lifts an FRP bucket with PE lining to 18 m, while the dropside tipper carries poles, cable drums, fittings and excavated soil.
The 4x2 diesel chassis has a gross vehicle weight of 11,995 kg, an eight-speed manual gearbox and overall dimensions of 7,610 × 2,370 × 3,540 mm. The bucket is rated at 280 kg, with a maximum working radius of 11.6 m at 100 kg or 10.6 m at 280 kg and a basket-bottom height of 16.3 m. The boom slews 360°, the bucket swings 120° and slides 0.5 m, and the lower arm elevates from −16.5° to 81°. Outriggers span 1,990 to 3,650 mm laterally, and an auxiliary lifting device handles up to 490 kg.
The insulating components are specified for 35/66 kV lines: the FRP upper boom section withstands 105 kV for one minute, the lifting device 100 kV, the bucket lining 50 kV for five minutes and the bucket 20 kV for five minutes. Typical work includes distribution line repair, pole replacement and cable laying. Chassis make, left- or right-hand drive and the insulation test report are confirmed with the order.
TECHNICAL DATA
| Vehicle Model | CLW5110JGKD618M |
|---|---|
| Gross Vehicle Weight | 11,995 kg |
| Overall Dimensions (L×W×H) | 7,610 × 2,370 × 3,540 mm |
| Steering Position | LHD or RHD |
| Emission Standard | Euro 2–6 (optional) |
| Drive Type | 4x2 |
|---|---|
| Fuel Type | Diesel |
| Transmission | 8 forward + 1 reverse, manual |
| Boom Type | Three-section telescopic boom |
|---|---|
| Maximum Operating Height | 18 m |
| Maximum Bucket-Bottom Height | 16.3 m |
| Rated Bucket Load | 280 kg |
| Maximum Working Radius | 11.6 m (100 kg) / 10.6 m (280 kg) |
| Boom Slewing Angle | 360° |
| Lower Arm Elevation | −16.5° to 81° |
| Bucket Swing Angle | 120° |
| Bucket Sliding Stroke | 0.5 m |
| Bucket | FRP, 1.05 × 0.73 × 1.10 m inside |
| Bucket Lining | PE, 1.01 × 0.68 × 1.10 m inside |
| Rated Line Voltage | 35 / 66 kV |
| Upper Boom Insulation Test | 105 kV / 1 min (FRP section) |
| Lifting Device Insulation Test | 100 kV / 1 min |
| Bucket Lining Insulation Test | 50 kV / 5 min |
| Bucket Insulation Test | 20 kV / 5 min |
| Auxiliary Lifting Device | 490 kg maximum |
| Outrigger Lateral Span | 1,990–3,650 mm |
| Outrigger Longitudinal Span | Left 4,359 mm; right 4,521 mm |
| Cargo Body | Dropside tipping bed |
CONFIGURATION
IN THE FIELD
Work on 35/66 kV class lines from the insulated FRP bucket.
Carry new poles and fittings in the bed and tip out spoil after digging.
Haul cable drums and lift crews to overhead attachment points.
BEFORE YOU ORDER
Maximum operating height is 18 m and the bucket is rated at 280 kg.
Yes. It is 11.6 m with 100 kg in the bucket and 10.6 m at the full 280 kg.
The FRP upper boom section is tested at 105 kV for one minute, the bucket lining at 50 kV for five minutes, and the bucket at 20 kV for five minutes, for 35/66 kV line work.
Operating limits with a loaded bed are set out in the manufacturer's operating instructions for the delivered unit.
KNOW YOUR NEXT TRUCK
A buyer's guide to truck-mounted aerial platforms from 14 m to 65 m: what the height figures mean, how boom type and basket rating affect the job, and which chassis and outrigger span each size needs.
Street-light crews, line crews and facade contractors need different aerial trucks. We match our 14 m to 65 m platforms to each job by height, outreach, stabilizer footprint, crew cab and chassis, using real figures.
Cherry picker, bucket truck and boom lift all put a person in a basket at height, but only two of them are the same machine. Here is how to tell them apart, what working heights are available on a truck and when a self-propelled lift is the better tool.
LET US BUILD YOUR NEXT TRUCK
Tell us your vehicle type, required capacity and destination country. Our team will help you discuss the right configuration.
[email protected] ↗+86 18871880125Selected vehicle: CLW 4x2 18 m Insulated Aerial Truck with Tipping Cargo Bed