FAW J6F 4x2 9,800 L Carbon Steel Fuel Tanker

This FAW J6F 4x2 tanker has a nominal 9,800 L single-compartment carbon steel tank for gasoline or diesel, placing it between small site refuelers and large highway distribution tankers. At 6,950 mm long with a 3,900 mm wheelbase, it fits fleet depots, construction sites, mines and farms where a medium load and good maneuverability both matter.

Power comes from a FAW Deutz CA4DD2-18E6 engine rated at 180 hp, driving through an eight-speed manual gearbox to a 7 t 340G rear axle. Air brakes with front discs and an exhaust brake, ABS, a speed limiter, GPS and an emergency shut-off valve are fitted to the chassis. The Q235B tank has a 4.2 mm shell, 4.5 mm heads and 4.2 mm baffles, with a Euro-style lid, bottom emergency valve, 76/40 pump for pumping in and out, rear ladder, guardrails and toolbox.

With a 5,255 kg curb weight and 6,545 kg rated payload inside an 11,995 kg gross vehicle weight, the truck is suited to daily refueling rounds and short distribution runs. A high-flow dispenser and a 15 m reinforced hose reel with nozzle can be added for metered delivery, and compartment layout, pump flow rate, paint and logos can be customized.

The 9,800 L figure is the tank's nominal volume, not a permissible full fuel load. Rated payload is 6,545 kg. Set the operating fill from the actual fuel density and the certified gross and axle-load limits of the final build.