Dongfeng 4x2 16 m³ Electric Refuse Compactor Truck

This Dongfeng 4x2 refuse compactor uses an electric drivetrain rather than a diesel engine. Battery capacity is 210 kWh and peak motor output is 200 kW. Driving range is confirmed with the final configuration and collection route. Those figures are most useful when compared with the length and stop pattern of the intended collection route; they do not by themselves establish energy use under a full waste load.

It is rated for a 5,805 kg payload and measures 8,950 × 2,550 × 3,400 mm. Its battery is identified as a CATL lithium iron phosphate unit. Fleet planners should check the loading location and charger access as carefully as the vehicle envelope, because collection vehicles spend much of their working time at low speed with the body hydraulics in use. Check these dimensions against depot entrances and unloading bays.

Before an electric collection route is assigned, confirm the finished refuse-body volume, charging specification and an energy-use estimate for the proposed duty cycle. These are separate from the stated motor, battery and payload figures. Confirm how the pack, body hydraulics and any optional bin lifter are integrated, then compare the resulting curb and loaded weights with local road limits. That gives a sounder basis for assessing this electric compactor than range alone.