Municipal road cleaning
Sweeps and washes paved streets in one route.
Road Sweeper Trucks
Shacman 18 t Sweeper Washer with Nominal 9 m³ Water Tank
This Shacman 4×2 sweeper washer has side brushes, suction and high-pressure cleaning. The nominal 9 m³ water tank cannot be filled for road use at the stated 5,900 kg maximum payload.
- GVW
- 18,000 kg
- Rated Payload
- 5,835–5,900 kg, cab dependent
- Cleaning Width
- 3.2–3.5 m
- Water Tank
- Approximately 9 m³ nominal shell; not road fill
From US $55,000
Review specifications and quotation.
THE VEHICLE
Overview
This Shacman road sweeper washer combines mechanical sweeping, suction and water washing on one 4×2 chassis. The photographed vehicle shows the enclosed refuse body, side brush assembly and rear discharge area. Its single-engine arrangement drives cleaning equipment through the vehicle power take-off.
Capacity and legal load
The specification lists an 18,000 kg gross vehicle weight, 11,970 kg curb weight and rated payload of 5,835 kg for a three-person cab or 5,900 kg for a two-person cab. The water tank is approximately 9 m³ and the refuse hopper approximately 7 m³. These are physical compartment volumes, not simultaneous permissible loads. The stated payload is at most 5,900 kg, so a full 9 m³ water tank alone would exceed that figure before any refuse is collected. Set water and refuse loads together within certified payload, gross weight and axle limits.
Cleaning configuration
Hydraulic side brushes, a central suction fan and high-pressure spray equipment clean a stated width of 3.2–3.5 m. Confirm the selected wheelbase, engine, tank configuration and final certified mass on the order specification.
TECHNICAL DATA
Specifications
Vehicle
| Drive | 4×2 |
|---|---|
| Gross Vehicle Weight | 18,000 kg |
| Curb Weight | 11,970 kg |
| Rated Payload | 5,835 kg (three-person cab) / 5,900 kg (two-person cab) |
| Wheelbase | 4,500 mm listed; final chassis selection to confirm |
Sweeping and Washing
| Water Tank | Approximately 9 m³ physical volume |
|---|---|
| Refuse Hopper | Approximately 7 m³ physical volume |
| Working Width | 3.2–3.5 m |
| Drive Arrangement | Single engine with PTO |
| Equipment | Side brushes, suction fan and high-pressure spray |
CONFIGURATION
Equipment
Standard equipment
- Side brushes and suction fan
- High-pressure water cleaning equipment
- Enclosed refuse hopper and water tank
IN THE FIELD
Applications
Industrial park cleaning
Collects surface debris and washes hard-surfaced internal roads.
BEFORE YOU ORDER
Common questions
Their stated volumes describe physical space. Water plus collected debris must remain within the approved payload, gross vehicle weight and axle limits.
The listed configuration uses a single vehicle engine with a power take-off; confirm the final equipment specification before ordering.
EXPLORE THE RANGE
Related vehicles
Foton 12.5 t Electric Road Sweeper Washer with 3.2 m Cleaning Width
- Up to 3.2 m
- 165 kWh CATL LFP
- 3,100 kg
A Foton 4×2 battery-electric sweeper washer with a 3.2 m maximum cleaning width, 165 kWh CATL battery, two side brushes and 3,100 kg rated payload.
Dongfeng 4x2 7.36 t Washing and Suction Sweeper
- Up to 3.2 m
- Diesel, 93–136 kW
- Dongfeng 4x2
At 6.35 m long on a 7.36 t Dongfeng chassis, this sweeper washes with high-pressure jets, brushes with contra-rotating side brooms and vacuums through a central fan across up to 3.2 m.
Dongfeng 4x2 Electric Sweeper with 5 m³ Water Tank
- 3.5 m
- 4 m³
- 5 m³
With 5 m³ of water on board, this Dongfeng electric sweeper can wash and vacuum longer between refills, pairing the tank with a 4 m³ hopper and 3.5 m sweep width on a 110 kWh CATL battery.
Dongfeng 4x2 4.5 m³ Electric Road Pollution Sweeper
- 3.5 m
- 4.5 m³
- 2.8 m³
A dry and wet separation bin sets this Dongfeng electric sweeper apart: a 4.5 m³ hopper sits beside a 4 m³ filter-cartridge silo, and a rear roller suction nozzle clears a 3.5 m path.
KNOW YOUR NEXT TRUCK
Related guides
Road Sweeper Truck Guide: Sweeping Width, Hopper Size, Price Factors
How to choose a road sweeper truck by cleaning method, sweeping width, hopper and water tank volume and power source, with real figures from our range and the choices that set the price.
Airport Ground Fleets: Refuelers, Crash Tenders and Support Trucks
Hydrant dispensers, tanker refuelers, crash tenders and the support trucks around them: what each airport vehicle does, which rules shape it, and where our fire, fuel and sweeper trucks fit.
Municipal Sanitation Fleet Planning for Collection and Cleaning
A municipal sanitation fleet needs the right sequence of collection, sweeping, washing and sewer maintenance vehicles. Plan work zones, disposal points, water access and maintenance before fixing truck quantities.
LET US BUILD YOUR NEXT TRUCK
Your job. Your specification.
Tell us your vehicle type, required capacity and destination country. Our team will help you discuss the right configuration.
[email protected] ↗+86 18871880125Selected vehicle: Shacman 18 t Sweeper Washer with Nominal 9 m³ Water Tank