Dongfeng 4x2 10 t Rollback Tow Truck with 8 t Crane

This Dongfeng 4x2 rollback is aimed at recovery operators who want to carry a disabled vehicle on the bed, tow a second one behind and handle lifting jobs with the same truck. The 10 t body pairs a 7.2 m sunken flatbed with an 8 t four-section crane mounted behind the cab, so crews can clear debris, lift wreckage or place cargo without calling a separate crane.

The chassis runs a 6.2 L B6.2NS6B245 diesel rated at 180 kW (245 hp) with a DT108 manual gearbox, a 5,800 mm wheelbase and 10.00R20 tires on a 6,500 / 11,500 kg axle-load split, for 18,000 kg gross vehicle weight. The body carries an 8 t hydraulic winch, a hydraulic flip tailboard and a 10 t rear tow arm, and the D530 half-row cab seats three. Wheel clamps, tow forks and tie-down belts are supplied with the truck.

At 10,680 mm long and 3,700 mm high, the truck suits highway rescue, heavy car and van towing, and impound work where one unit has to load, tow and lift. The emission level can be supplied from Euro 2 to Euro 6. Check the crane load chart at the intended working radius, since lifting capacity falls as the boom extends.