Roadside assistance
Collects broken-down cars and SUVs and returns them to a workshop on the lower or upper deck.
Tow Trucks
Foton 4x2 6t Flatbed Recovery Tow Truck
A light Foton 4x2 recovery truck with a 6 t flatbed on upper and lower deck sections, a 4 t winch and a 160 hp Yunnei engine for quick car and van recovery.
- Tow Type
- Two-Position Flatbed
- Lifting / Towing Capacity
- 6 t (flatbed)
- Bed Length
- 4.4 m lower / 4.2 m upper
- Winch Pull
- 4 t
From US $20,000
Review specifications and quotation.
THE VEHICLE
Overview
This Foton 4x2 recovery truck uses a two-position flatbed: a 4.4 m lower deck and a 4.2 m upper deck, so a light truck can bring back two passenger cars from a breakdown or accident call. It suits roadside assistance companies, dealers and rescue services that mostly handle cars, SUVs and small vans rather than heavy trucks.
The Foton Aoling chassis is powered by a 160 hp Yunnei diesel engine with a FAST 8-speed manual gearbox, a 3,600 mm wheelbase, a 4.33 axle ratio and a three-layer straight frame on 12.00R20 tires. The flatbed system is rated at 6 t and uses a sink-down cylinder layout with a 105 mm main lifting cylinder, a 95 mm auxiliary cylinder and a 105 mm rear support-arm cylinder. The lower deck is 2,500 mm wide with a five-row anti-slip plate, and a 4 t winch pulls non-running vehicles aboard.
Auxiliary dollies, L-type support brackets, tie-down straps and double hooks come with the truck, and the sub-frame and vertical beams are reinforced for repeated loading. The 7,800 mm overall length helps in city streets and tight service yards, while the 89 km/h top speed covers highway call-outs. The emission level can be matched to Euro 2 through Euro 6 requirements.
TECHNICAL DATA
Specifications
Vehicle
| Overall Dimensions (L×W×H) | 7,800 × 2,600 × 2,500 mm |
|---|---|
| Emission Standard | Euro 2–6 (optional) |
| Cab Type | Wide-Body Cab |
| Cab Seats | 2–3 |
Chassis
| Chassis Brand | Foton (Aoling) |
|---|---|
| Drive Type | 4x2 |
| Engine | Yunnei Diesel, 160 hp |
| Transmission | FAST 8-Speed Manual |
| Gearbox PTO | Original Factory PTO |
| Wheelbase | 3,600 mm |
| Axle Ratio | 4.33 |
| Rear Axle Rating | 6 t |
| Chassis Frame | Three-Layer Straight Frame |
| Tire Specification | 12.00R20 |
Superstructure
| Flatbed Type | Two-Position (Upper and Lower Deck) |
|---|---|
| Flatbed Rated Capacity | 6 t |
| Lower Deck Length | 4.4 m |
| Lower Deck Width | 2,500 mm |
| Lower Deck Floor | 5-Row Anti-Slip Pattern Plate |
| Upper Deck Length | 4.2 m |
| Upper Deck Width | 2,240 mm |
| Cylinder Design | Sink-Down Cylinder |
| Main Lifting Cylinder Diameter | 105 mm |
| Rear Support Arm Cylinder Diameter | 105 mm |
| Auxiliary Cylinder Diameter | 95 mm |
| Winch Pull | 4 t |
| Recovery Accessories | Auxiliary Dollies, L-Type Brackets, Tie-Down Straps, Double Hooks |
Performance
| Maximum Speed | 89 km/h |
|---|
IN THE FIELD
Applications
Accident scene clearance
Removes damaged passenger vehicles from urban roads and highways using the 4 t winch and dollies.
Dealer and fleet transfers
Moves cars between dealerships, rental depots and service centers on the two-deck bed.
BEFORE YOU ORDER
Common questions
The two-position flatbed is rated at 6 t in total, so the combined weight of vehicles on both decks must stay within that figure.
The lower deck is 4.4 m long and 2,500 mm wide; the upper deck is 4.2 m long and 2,240 mm wide.
A 4 t winch for pulling non-running vehicles onto the deck. Its pulling rating is separate from the 6 t flatbed load.
A Foton Aoling 4x2 chassis with a 160 hp Yunnei diesel engine and a FAST 8-speed manual gearbox.
EXPLORE THE RANGE
Related vehicles
JAC 4x2 Integrated Wheel-Lift Recovery Truck
- Hydraulic wheel-lift / underlift
- 3 t; final rating to verify
- 4x2
A compact JAC 4x2 recovery truck with a hydraulic wheel-lift, adjustable crossbar and integrated tool storage for roadside towing.
Shacman 8x4 Heavy Recovery Wrecker with Dual 25 t Winches
- 41,000 kg
- 2 × 25 t (source-stated pull rating)
- Three-section boom and underlift
An 8x4 Shacman heavy recovery truck on SX5419TXJMC6Z1 chassis, with 41,000 kg GVW, three-section recovery boom and two listed 25 t winches.
Foton Aumark 5.6 m Full-Drop Flatbed Wrecker with 3 t Tow Arm
- 5,600 mm
- 2,655 kg
- 3,000 kg
An 8,275 kg GVW Foton Aumark recovery truck with a 5.6 m full-drop bed, 2,655 kg stated platform load and separate 3 t rear tow arm.
Shacman 6x2 8 t Crane Wrecker Tow Truck
- Flatbed crane wrecker
- 8 t crane / 8 t rear arm
- 6 t
A Shacman 6x2 crane wrecker with a 350 hp Weichai engine, an 8 t crane behind the cab, an 8 t three-section rear towing arm and a 6 t winch for multi-vehicle recovery.
KNOW YOUR NEXT TRUCK
Related guides
Tow Truck Types: Flatbed, Wheel-Lift, Integrated and Heavy Wreckers
Our engineers compare flatbed carriers, wheel-lift units and integrated wreckers by deck, underlift, boom and winch ratings, so fleet buyers can match truck and chassis to the vehicles they recover.
Car Carrier Types: Single-Car Trucks to 8-Car Two-Deck Trailers
Open flatbed, enclosed single-car truck or two-deck semi-trailer: how car carrier types differ in cars per trip, protection and loading, why height and deck length limit a load before weight, and what the tractor must supply.
Truck-Mounted Crane Capacity: How to Read a Load Chart Correctly
The tonnage on a crane nameplate is one point on its load chart. Working radius, load moment in t·m, outrigger setup and boom type decide what a crane truck can really lift on your jobs, and how much chassis it needs.
LET US BUILD YOUR NEXT TRUCK
Your job. Your specification.
Tell us your vehicle type, required capacity and destination country. Our team will help you discuss the right configuration.
[email protected] ↗+86 18871880125Selected vehicle: Foton 4x2 6t Flatbed Recovery Tow Truck